WOODNESS SHOP
WPC.EXT | EAST | EXTERIOR | DECK | OAK
$65.61
SqFt Market Price: $ 18.22
Specifications
| Serie |
East |
|---|---|
| Design |
Deck |
| Color |
Oak |
| Use |
Deck |
| Unit |
Piece |
| Sqft/Box |
3.60 |
| Sqft/PC |
3.60 |
| Unit Quantity |
1 |
| Location |
Exterior |
| Size |
2440 x 140 x 24 mm ,5.51" x8' x 0.94" |
PRODUCT SPECIFICATIONS
Timeless and versatile, the Oak-finish WPC exterior deck offers a clean, natural look that complements a wide range of outdoor styles. Made from Wood Plastic Composite, it combines the warmth of wood with enhanced durability—perfect for decks, balconies, and garden paths.
Each board measures 5.51” wide by 8’ long with a thickness of 0.94”, covering 3.60 square feet per piece. The Oak tone brings a soft, neutral elegance that pairs beautifully with both modern and rustic settings. With easy installation and minimal upkeep, it’s a reliable and stylish solution for residential and commercial outdoor spaces.
ADDITIONAL INFORMATION
Installation
Shorten the construction period and improve labor efficiency due to the profiles with standard size which only need some necessary trimming, installa- tion is very easy, it can be saw cut, leveled, nailed, painted and glued simply to finish the inst
Indoor installation methods
Method 1 : NAILS
Surface or metope wooden guide or keel Board nail position it is best to drive the nail diagonally into the hard surface the nail head will be covered with the other board today when they are connected does not affect appearance
Method 2: WPC FASTNERS CLIPS
Insert the WPC fasteners into the bottom at the edge of the wall board fix to the wall this method applies when the wall is well leveled and has a flat surface set the screws in the spaces of the WPS fasteners
Method 3: WOODEN KEEL LEVELING THE WALL
Self-tapping screws for stainless steel fasteners fix to the keel or guide to the wall this method installs all boards, can be disassembled and reused
Method 4: GLUE
Glued directly to the wall with siliconeallation, does not need further processing
STEP 1
Pre-work with plaster board or plywood is recommended before the construction. Please remove wallpapers on the walls before the construction.
STEP 2
Circular saw can be used for cutting.
STEP 3
Apply nail free glue on the back of wall panel.
STEP 4
Wall panel can be installed in both horizontal land vertical direction. Apply air-tacker on the edge of the tongue to hide the pin-marks.
STEP 5
For corner, combine the two grooves.
STEP 6
Coordinating mouldings can be used for clean and nice finish.
KEEL
GLUE
CLIPS
SCREW
NAIL
